Product details AKPE-01М-01 EXP
The analyzer of ethanol vapor concentration in exhaled air AKPE-01M-01 is designed for the rapid measurement of the mass concentration of ethanol vapor in a sample of exhaled air.Functions:
- Control expiration time.
- Monitoring and registration of exhalation interruption and incomplete exhalation with display of violations on the display.
- Express analysis and indication of the presence of alcohol on a short expiration.
- Measurement of the mass concentration of ethanol vapor in the exhaled air with the presentation of the result on the liquid crystal display.
- Preservation not less than 2000 results of measurements with a binding by date and time in fiscal memory.
- Printout of the measurement results on the included printing device.
- Objective examination: eliminates incorrect result in cases of fixed alcoholism in the oral cavity, indicates interruption of breathing, insufficient expiratory force.
- Control of ambient air: automatically controls the alcohol content in the ambient air and the sample delivery system.
- Protocol printout: the protocol contains measurement results, date, time, device number and protocol number. There is a fixed memory of results.
- Performance: allows you to perform up to 80 surveys in one hour.
- Accuracy: does not require calibration of the full service life and maintains the stability of the metrological characteristics without the use of calibration gas mixtures.
Specification AKPE-01М-01 EXP
Range of measurements of large ethanol vapour concentration in exhaled breath
From 0 to 1,500 mg/l
Range of readings
From 0 to 5,000 mg/l
Maximum permissible absolute error in the range of 0-0,200 mg/l
aximum permissible relative error in a range higher than 0,200 - 1,500 mg/l
Time of measurement after sample selection
No more than 5 s
Set-up time after turning on at the ambient air temperature (20 ± 5) °С
Set-up time after measurement at the ambient air temperature (20 ± 5) °С
Number of measurements in analysers without recharging the rechargeable battery
No less than 250
Power supply - On-board network (12.6±2) V - Built-in rechargeable battery - Network supply and charge (5±0,25) V
Power consumption in the warm-up mode, no more
Power consumption in operating mode, not more than
Dimensional specifications, no more than
Weight, no more than